NI-Sync 15.0.1 - Pharlap ETS, Windows 10/8/8.1/7/Vista/XP (SP3) 32-bit/Server 2012 R2 64-bit/Server 2008 R2 64-bit/Server 2003 R2 32-bit 1 Ratings | 5.00 out of 5 |   Print

Available Downloads:

Updates and Notifications:
Critical Updates and Security Notifications are posted on Before downloading, click here to review this information.
Supporting Files:

Download Language: English

Product Line: PXI/CompactPCI

Version: 15.0.1

Release date: 09-28-2015

Software type: Driver

Operating system: Pharlap ETS; Windows 10; Windows 8; Windows 8.1; Windows 7; Windows Vista; Windows XP (SP3) 32-bit; Windows Server 2012 R2 64-bit; Windows Server 2008 R2 64-bit; Windows Server 2003 R2 32-bit


For a complete list of supported products, please refer to the readme.html attached above. 

Thank you for using NI-Sync 15.0.1.  NI-Sync is the latest synchronization driver for NI Timing and Synchronization hardware modules.

Install Application Development Environments (NI LabVIEW/LabVIEW RT) before installing NI-Sync. NI-Sync 15.0.1 supports the following NI Application Development Environment versions:

NI Application Software Versions Supported by NI-Sync 15.0.1
NI LabVIEW 2012, 2013, 2014, 2015
LabVIEW RT 2012, 2013, 2014, 2015
LabWindows™/CVI™ 2012, 2013, 2015


Installation Instructions

  1. Download NISync1501.exe
  2. Run the self-extracting NISync1501.exe and follow the posted instructions. This will create the installation files necessary for installing NI-Sync 15.0.1
  3. After extraction is complete, the installation will begin. If not, run setup.exe to launch the installer


Your Feedback

Rate this document

Answered Your Question?
Yes No