NI RF Device Drivers 2016.11 0 Ratings | 0.00 out of 5 |   Print

Available Downloads:

Updates and Notifications:
Critical Updates and Security Notifications are posted on ni.com. Before downloading, click here to review this information.
Supporting Files:

Download Language: English

Product Line: RF

Version: November 2016

Release date: 12-09-2016

Software type: Driver

Operating system: Windows 10 32-bit; Windows 10 64-bit; Windows 8.1 32-bit; Windows 8.1 64-bit; Windows Embedded Standard 7 (SP1); Windows Server 2012 R2 64-bit; Windows Server 2008 R2 (SP1) 64-bit

Description

Choosing What Software to Install

To help you decide which software to install, refer to the following descriptions:

NI-RFmx SpecAn 2.2—Use this software to perform spectral measurements with NI RF vector signal analyzers or the RF input subsystem of vector signal transceivers (VSTs).

NI-RFmx Demod 2.2—Use this software to perform demodulation measurements with NI RF vector signal analyzers or the RF input subsystem of VSTs.

NI-RFSA 16.0—This software installation provides support for customers using NI RF vector signal analyzers or the RF input subsystem of VSTs. To program the NI RF vector signal analyzer or NI RF VST, use the NI-RFSA API. The getting started guide for your device provides information about how to install, configure, test, and begin using an NI RF vector signal analyzer or VST.

NI-RFSG 16.0—This software installation provides support for customers using NI RF signal generators or the RF output subsystem of VSTs. To program the NI RF signal generator or NI RF VST, use the NI-RFSG API. The getting started guide for your device provides information about how to install, configure, test, and begin using an NI RF signal generator or VST.

NI LabVIEW 2015 Instrument Design Libraries for NI PXIe-5644R/5645R/5646R Vector Signal Transceivers 15.0.2—This software installation provides support for customers who want to program the FPGA on the NI PXIe-5644R/5645R/5646R (NI 5644R, NI 5645R, NI 5646R) VSTs using LabVIEW 2015. To program the FPGA on these VSTs, use the instrument design libraries and the LabVIEW 2015 FPGA Module. The getting started guide for your device provides information about how to install, configure, test, and begin using an NI RF vector signal transceiver.

NI LabVIEW 2015 Instrument Design Libraries for IF Digitizers 15.0—This software installation provides support for customers who want to program the FPGA on the NI PXIe-5624R (NI 5624R) IF digitizer using LabVIEW 2015. To program the FPGA on the NI 5624R, use the instrument design libraries and the LabVIEW 2015 FPGA Module. The getting started guide for your device provides information about how to install, configure, test, and begin using an NI 5624R IF digitizer.

Modulation Toolkit (LabVIEW)—This software installation provides additional modulation scheme software functionality for customers using NI RF vector signal generators, NI arbitrary waveform generators, NI RF vector signal analyzers, and NI high-speed digitizers.

Spectral Measurements Toolkit (LabVIEW and LabWindows/CVI)—This software installation provides additional spectral measurement software functionality for customers using NI RF vector signal analyzers and NI high-speed digitizers.

Installation Instructions

  1. Download and Extract RFDVRSUITE201611.zip into a temporary location.
  2. Launch setup.exe

To conserve disk space you can delete the downloaded .zip file, however it is recommended that you keep the extracted installation files in case you need to add features from the distribution in the future, or plan to create your own installers using National Instruments development environments.

Your Feedback

Rate this document

Answered Your Question?
Yes No

Submit