NI RF Device Drivers 2017.07 0 Ratings | 0.00 out of 5 |   Print

Available Downloads:

Updates and Notifications:
Critical Updates and Security Notifications are posted on ni.com. Before downloading, click here to review this information.
Supporting Files:

Download Language: English

Product Line: RF

Version: July 2017

Release date: 07-28-2017

Software type: Driver

Operating system: Windows 10 32-bit; Windows 10 64-bit; Windows 8.1 32-bit; Windows 8.1 64-bit; Windows 7 (SP1) 32-bit; Windows 7 (SP1) 64-bit; Windows Embedded Standard 7 (SP1); Windows Server 2012 R2 64-bit; Windows Server 2008 R2 (SP1) 64-bit

Description

Choosing What Software to Install

To help you decide which software to install, refer to the following descriptions:

NI-RFmx SpecAn 2.3—Use this software to perform spectral measurements with vector signal analyzers or the RF input subsystem of vector signal transceivers (VSTs).

NI-RFmx Demod 2.3—Use this software to perform demodulation measurements with vector signal analyzers or the RF input subsystem of VSTs.

NI-RFSA 17.1—This software installation provides support for customers using vector signal analyzers or the RF input subsystem of VSTs. To program the vector signal analyzer or VST, use the NI-RFSA API. The getting started guide for your device provides information about how to install, configure, test, and begin using a vector signal analyzer or VST.

NI-RFSG 17.1—This software installation provides support for customers using RF signal generators or the RF output subsystem of VSTs. To program the RF signal generator or VST, use the NI-RFSG API. The getting started guide for your device provides information about how to install, configure, test, and begin using a RF signal generator or VST.

NI LabVIEW 2015 Instrument Design Libraries for NI PXIe-5644R/5645R/5646R Vector Signal Transceivers 15.0.2—This software installation provides support for customers who want to program the FPGA on the PXIe-5644R/5645R/5646R (PXIe-5644/5645/5646) VSTs using LabVIEW 2015. To program the FPGA on these VSTs, use the instrument design libraries and the LabVIEW 2015 FPGA Module. The getting started guide for your device provides information about how to install, configure, test, and begin using a VST.

NI LabVIEW 2015 Instrument Design Libraries for IF Digitizers 15.0—This software installation provides support for customers who want to program the FPGA on the PXIe-5624R (PXIe-5624) IF digitizer using LabVIEW 2015. To program the FPGA on the PXIe-5624, use the instrument design libraries and the LabVIEW 2015 FPGA Module. The getting started guide for your device provides information about how to install, configure, test, and begin using a PXIe-5624 IF digitizer.

Modulation Toolkit (LabVIEW)—This software installation provides additional modulation scheme software functionality for customers using vector signal generators, waveform generators, vector signal analyzers, and IF digitizers.

Installation Instructions

  1. Download and Extract RFDVRSUITE201707.zip into a temporary location.
  2. Launch setup.exe

To conserve disk space you can delete the downloaded .zip file, however it is recommended that you keep the extracted installation files in case you need to add features from the distribution in the future, or plan to create your own installers using National Instruments development environments.

Your Feedback

Rate this document

Answered Your Question?
Yes No

Submit