NI-PROFINET for cRIO 2.0.3 - Windows 10/8.1/7 0 Ratings | 0.00 out of 5 |   Print

Available Downloads:

Updates and Notifications:
Critical Updates and Security Notifications are posted on Before downloading, click here to review this information.
Supporting Files:

Download Language: English

Product Line: Profinet

Version: 2.0.3

Release date: 01-16-2017

Software type: Driver

Operating system: Windows 10; Windows 8.1; Windows 7


The NI-Profinet driver is shipped with the Comsoft cRIO PROFINET Slave C-Series module. The driver installs PROFIBUS device support for LabVIEW 2013 or later and installs the Configurator III utility program.


  • Version 2.0.3 adds support for LabVIEW 2016
  • Max. 254 bytes input and 254 bytes output data
  • 16 PROFINET IO slots supported
  • Acyclic communcation Read/Write Record with max. 256 Bytes
  • Configuration entirely takes place by means of the delivered software. Thus, no jumpers or DIP-switch adjustments are necessary.
  • Acyclic communcation Read/Write Record with max. 256 Bytes

Installation Instructions

Download and extract the file. The zip file contains the installation file necessary for installing the PROFINET hardware driver and documentation. Once extracted, double click Setup_v2.0.3.exe to get started. After the installation completes, you may delete the installation image to recover disk space. You should not delete the installation image if you wish to be able to modify or repair the installation in the future.

Upgrading: You will first be prompted by Setup_v2.0.3.exe to uninstall the previous version. After this is complete, restart your computer and run Setup_v2.0.3.exe again to install the new version.

More Information

Your Feedback

Rate this document

Answered Your Question?
Yes No