Standard Download:NIDAQmxBase320.exe (347.16 MB).
Checksum (MD5): 3a65c8c5221ffaf4773fa013116577f2
ReadMe (English) (63 KByte)
Download Language: English
Product Line: Multifunction DAQ
Release date: 07-01-2008
Software type: Driver
Operating system: Windows Vista; Windows Vista 64-bit; Windows XP; Windows CE; Windows Mobile 5
Thank you for using NI-DAQmx Base, version 3.2 for Windows, PDA, and Touch Panel.
The NI-DAQmx Base 3.2 software provides LabVIEW and C Application Programming Interfaces (APIs) which allows you to create applications for your National Instruments DAQ devices which will run on Windows. It also provides APIs to program your DAQ device with the LabVIEW Mobile Module or the LabVIEW Touch Panel Module
Refer to the NI-DAQmx Base Readme for more information about the NI-DAQmx Base driver and differences between NI-DAQmx Base and NI-DAQmx.
The NI-DAQmx Base installer is packaged as a self-extracting archive that will automatically launch the driver installer. By default, files are extracted to C:\National Instruments Downloads\NI-DAQmx Base\NIDAQmxBase320\ and can be deleted to conserve disk space. It is recommended that you keep the extracted installation files in case you need to add features from NI-DAQmx distribution in the future.
Perform the following steps to install NI-DAQmx Base:
To conserve disk space you can delete your extracted files. It is recommended that you keep the extracted installation files in case you need to add features from the NI-DAQmx Base distribution in the future.
The following devices are supported for use with this download: