Multisim Student Edition 10.0.1 - Multisim Student & MCU Module - Windows Vista/Vista 64-bit/XP/2000 54 Ratings | 3.59 out of 5 |   Print

Available Downloads:

Standard Download: NI_CDS_10_0_1_Stu.exe (257.5 MB)
Checksum (MD5): 2ac439abf964f56e2b9d75d9228fcb52
Updates and Notifications:
Critical Updates and Security Notifications are posted on ni.com. Before downloading, click here to review this information.
Supporting Files:

Download Language: English; German; Japanese

Product Line: Multisim

Version: 10.0.1

Release date: 06-01-2007

Software type: Application Software

Operating system: Windows Vista; Windows Vista 64-bit; Windows XP; Windows 2000

Description

This NI Circuit Design Suite 10.0.1 download updates all Version 10 Student Editions, this includes:

  • Multisim Student
  • Multisim MCU Module
  • Ultiboard Student
NOTE: Based on all the features added to this update this is a complete software installer, therefore the file size is ~260 MB. This installer does not requires you to have a previous version 10 installed, however it will require you to have a valid version 10 serial number to activate it.

Windows Vista Support
NI Circuit Design Suite 10.0.1 adds support for all Windows Vista 32- and 64-bit users.

Localization
NI Circuit Design Suite 10.0.1 is localized for English, German, and Japanese. The language that the software uses by default depends on your system locale settings.

Bug Fixes
NI Circuit Design Suite 10.0.1 fixes 170+ bugs, for a complete list of fixes and Defect IDs please see the Readme file.

LabVIEW Instruments Support
NI Multisim 10.0.1 supports LabVIEW instruments created in LabVIEW 8.2.x or later only. If you have instruments created with LabVIEW 8.0.x or 8.1.x, you must rebuild them using LabVIEW 8.2.x or later.

Features

  • Windows Vista 32- and 64-bit support
  • English, German and Japanese localization
  • 170+ bug fixes (see Readme file for details)

Installation Instructions

If you have Circuit Design Suite 10.0 installed, you can install Circuit Design Suite 10.0.1 without first uninstalling Circuit Design Suite 10.0.

NOTE: Because Circuit Design Suite installs 10.0.1 over 10.0, you cannot have both Circuit Design Suite 10.0 and 10.0.1 installed simultaneously.

If you do not have Circuit Design Suite 10.0 installed, you can install Circuit Design Suite 10.0.1 without first installing Circuit Design Suite 10.0.

If you have Circuit Design Suite 10.0 installed and you are a Windows Vista user or have a localized (non-English) system we recommend that you first uninstall 10.0 using the Control Panel, and then install 10.0.1.

Product versions updated:

All Professional (Base, Full, Power Pro) and Academic (Educational, Student) editions of NI circuit Design Suite 10.0 with the following build versions can be updated with this download:

  • Build 10.0.144
  • Build 10.0.175
  • Build 10.0.267
NOTE: You can check the Build Version of your installation if you select Help » About Multisim.

After the update is installed your software Build Version will be 10.0.343.

  1. Download this self-extract executable to your local hard disk
  2. Double-click the file to run the unzip utility, this will start the Setup application once all files have been unzipped
  3. Follow the installer instructions
NOTE: You may need to reboot the computer after setup is complete.

Your Feedback

Rate this document

Answered Your Question?
Yes No

Submit