GNU C & C++ Compilers for x64 Linux (Windows host) 2017-2019 2 Ratings | 5.00 out of 5 | Print
Available Downloads:
Download Link: oecore-i686-core2-64-toolchain-5.0.tar.bz2
- Click the Download Link link above.
- Your browser will begin downloading the standalone installer for your software.
- Once the standalone installer has been downloaded, launch the executable and follow the onscreen prompts to complete the installation of your software.
Filesize: 247.3 MB
Checksum (MD5): b15def278ba32098d1f7b9a92ccbca92
Download Language: English
Product Line: LabVIEW
Version: 2017
Release date: 05-23-2017
Software type: Utility
Operating system: Windows
Description
The C/C++ cross compiler supports NI RIO hardware running the NI Linux Real-Time operating system built with OpenEmbedded 2.1 (Krogoth). Recommended for use with the 2017 release of NI Linux Real-Time.
This cross compiler toolchain is based on GCC 5.3.
NOTE For the 2018/2019 software sets, use the 2018/2019 versions of the software in the table below.
| 2017 Software Set | ||||||||||||||||
| NI Software | cRIO-906x, cRIO-903x, sbRIO-9651, sbRIO-96x7 | NI 793xR | NI myRIO and NI roboRIO |
cDAQ- 9132/9134/9136 |
CVS- 1458RT/1459RT |
IC- 317x/312x |
||||||||||
| Required | Optional | Required | Optional | Required | Optional | Required | Optional | Required | Optional | Required | Optional | |||||
| LabVIEW 2017 | ✓† | ✓† | ✓ | ✓ | ✓† | ✓† | ||||||||||
| LabVIEW 2017 FPGA Module | ✓† | ✓† | ✓ | n/a | n/a | ✓† | ✓† | |||||||||
| LabVIEW 2017 Real-Time Module | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||||||||
| NI RIO Device Drivers 2017 | ✓ | ✓ | n/a | n/a | ✓ | |||||||||||
| FlexRIO 17.0 | ✓ | |||||||||||||||
| FPGA Interface C API 17.0 | ✓* | ✓* | ✓ | n/a | n/a | ✓* | ✓* | |||||||||
| NI DAQmx 2017 | ✓ | |||||||||||||||
| C/C++ Development Tools for NI Linux Real-Time, Eclipse Edition 2017 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ||||||||||
| Vision Development Module 2017 | ✓ | ✓ | ||||||||||||||
| Vision Acquisition Software August 2017 | ✓ | ✓ | ||||||||||||||
| Industrial Controller Device Drivers 16.0 | ✓ | |||||||||||||||
*The FPGA Interface C API provides a communication layer between the LabVIEW FPGA VI and a C/C++ real-time application. It is not required if using LabVIEW Real-Time to build the real-time application.
†LabVIEW and LabVIEW FPGA are required to develop the FPGA VI and compiled bitfile that runs on the FPGA.
