LabVIEW 2015 FPGA Module - English 0 Ratings | 0.00 out of 5 |   Print

Available Downloads:

Need previous versions? Access your SSP benefits by logging in.
Updates and Notifications:
Critical Updates and Security Notifications are posted on Before downloading, click here to review this information.

Download Language: English

Product Line: LabVIEW

Version: 2015

Release date: 08-03-2015

Software type: Module

Operating system: Windows 7; Windows Vista; Windows Server 2012 R2 64-bit; Windows Server 2008 R2 64-bit; Windows Server 2003 R2 32-bit


The NI LabVIEW FPGA Module extends the LabVIEW graphical development platform to target field-programmable gate arrays (FPGAs) on NI reconfigurable I/O (RIO) hardware.


  • Flushing FIFOs to flush data from a DMA target-to-host FIFO to the host or from a peer-to-peer writer FIFO to the peer-to-peer reader FIFO. It minimizes latency in data transfers.
  • New VIs for floating point PID Algorithm on FPGA. PID VI implements a single-precision floating point PID algorithm. Additionally, Convert PID Gains VI can be used on the FPGA.

Installation Instructions

Perform the following steps to install LabVIEW FPGA Module 2015:

  1. Close all NI software.
  2. Run the self-extracting installer 2015FPGA-Eng.exe and follow the prompts.
  3. Verify that the software installs correctly. In NI MAX expand My System»Software»LabVIEW 2015 and look for FPGA.
  4. Perform these steps for all development systems where you want to install.
  5. From a development system, reinstall all software to all deployed systems you wish to upgrade.
  6. (Note: Applies to deployed software only.)
To conserve disk space you can delete your extracted files. It is recommended that you keep the extracted installation files in case you need to add features from this distribution in the future.

Your Feedback

Rate this document

Answered Your Question?
Yes No