GNSS Simulation Toolkit 3.0 - Windows 7 32-bit/7 64-bit/Vista 32-bit/Vista 64-bit/XP (SP3) 32-bit/Server 2008 R2 64-bit/Server 2003 R2 32-bit 4 Ratings | 3.00 out of 5 |   Print

Available Downloads:

Updates and Notifications:
Critical Updates and Security Notifications are posted on Before downloading, click here to review this information.
Supporting Files:

Download Language: English

Product Line: RF

Version: 3.0

Release date: 01-12-2013

Software type: Addons

Operating system: Windows 7 32-bit; Windows 7 64-bit; Windows Vista 32-bit; Windows Vista 64-bit; Windows XP (SP3) 32-bit; Windows Server 2008 R2 64-bit; Windows Server 2003 R2 32-bit


Supported Hardware

Hardware Product Supported Under Windows 7 (32-bit)/Vista (32-bit)/XP1 Supported Under Windows 7 (64-bit)/Vista (64-bit)
NI PXI-5672
NI PXI-5673
NI PXI-5673E
1 MXI Express and MXI-4 are supported on Windows 7/Vista/XP, but MXI-3 is supported on only Windows XP.

Application Development Environments (ADEs)

  • NI LabVIEW 8.6.1 (32-bit), 2009 SP 1 (32-bit), 2010 SP 1 (32-bit), 2011 (32-bit), or 2012 (32-bit)
  • NI LabWindows™/CVI™ 8.5.1 or later

Additional Required Software

  • NI-RFSG 1.8.5 or later
  • NI LabVIEW Modulation Toolkit 4.2.1 and later

Installation Instructions

Perform the following steps to install NI GNSS Simulation Toolkit:

  1. Create a temporary folder on your local hard drive and name it NIGNSS300
  2. Download the NIGNSS300.exe file into the folder you created in step 1.
  3. Goto the NIGNSS300 folder.
  4. To launch the NI GNSS installer, double-click the NIGNSS300.exe program.
  5. Follow the instructions.

To conserve disk space you can delete the downloaded .exe file, however it is recommended that you keep the files in case you need to add features from the NI WLAN distribution in the future, or plan to create your own installers using National Instruments development environments.

Your Feedback

Rate this document

Answered Your Question?
Yes No