Table Of Contents

What You Need to Get Started

Version:
    Last Modified: March 13, 2018

    You will need the following items to set up your FieldDAQ device.

    Figure 1. FD-116xx Installation Supply List
    1. Host Computer running Windows
    2. Application Software
    3. NI-DAQmx Driver
    4. FD-11603
    5. 5-pin L-coded M12 Power Input Cable
    6. 8-pin X-coded M12 Ethernet Cable
    7. External Power Supply
    8. 5-pin A-coded M12 Voltage Input Cables and Accessories
    spd-note-note
    Note  

    You can either use a shielded straight-through Ethernet cable or an Ethernet crossover cable to connect the FieldDAQ device directly to your computer.


    Recently Viewed Topics