Table Of Contents

NI-5782 Front Panel

Version:
    Last Modified: April 24, 2017

    Table 1. NI-5782 Front Panel Connectors
    Device Front Panel Connector Signal Description
    AUX I/O Digital I/O and PFI connector
    CLK IN 50 Ω single-ended (SE) external Reference or Sample Clock input.
    TRIG Trigger input channel.
    AI 0 50 Ω SE analog input (AI) channel 0.
    AI 1 50 Ω SE AI channel 1.
    AI 0 50 Ω SE analog output (AO) channel 0.
    AI 1 50 Ω SE AO channel 1.
    spd-note-caution
    Caution  

    To avoid permanent damage to the NI-5782, disconnect all signals connected to the NI-5782 before powering down the module, and connect signals only after the adapter module has been powered on by the FlexRIO FPGA module or Controller for FlexRIO.

    spd-note-caution
    Caution  

    Connections that exceed any of the maximum ratings of any connector on the NI-5782 can damage the device and the chassis. NI is not liable for any damage resulting from such connections.


    Recently Viewed Topics