Table Of Contents

NI-5792 Front Panel

Version:
    Last Modified: April 24, 2017

    Table 1. NI-5792 Front Panel Connectors
    Device Front Panel Connector Signal Description
    RX IN Receive channel input, +20 dBm maximum
    LO OUT Local oscillator output, +12 dBm maximum, +0 dBm nominal
    CLK IN Reference Clock input, 50 Ω single-ended, +20 dBm maximum
    CLK OUT Exported clock output, DC-coupled, 0 V to 2 V
    LO IN Local oscillator input, +20 dBm maximum
    AUX I/O Digital I/O and PFI connector
    spd-note-caution
    Caution  

    To avoid permanent damage to the NI-5792, disconnect all signals connected to the NI-5792 before powering down the module, and connect signals only after the adapter module has been powered on by the FlexRIO FPGA module or Controller for FlexRIO.

    spd-note-caution
    Caution  

    Connections that exceed any of the maximum ratings of any connector on the NI-5792 can damage the device and the chassis. NI is not liable for any damage resulting from such connections.


    Recently Viewed Topics