Table Of Contents

PXIe-5433 SCB-19 Pinout

Version:
    Last Modified: April 24, 2017

    NI recommends using the SCB-19 connector block to connect digital signals to the AUX 0 connector on the PXIe-5433 front panel. Refer to the following figure and table for information about the SCB-19 signals when connected to the AUX 0 front panel connector.

    Table 1. SCB-19 Signal Descriptions
    Pin Signal Description
    1 PFI 0 Bidirectional PFI line
    2 PFI 1 Bidirectional PFI line
    3 PFI 2 Bidirectional PFI line
    4 PFI 3 Bidirectional PFI line
    5 NC No connection
    6 NC No connection
    7 NC No connection
    8 NC No connection
    9 PFI 4 Bidirectional PFI line
    10 PFI 5 Bidirectional PFI line
    11 PFI 6 Bidirectional PFI line
    12 PFI 7 Bidirectional PFI line
    13 +3.3 V +3.3 V power (200 mA maximum)
    <14..26> GND Ground reference for signals

    Recently Viewed Topics