Table Of Contents

PXIe-4162 Pinout and LEDs

Version:
    Last Modified: January 23, 2018

    Front Panel

    Refer to the following figures and tables for information about the PXIe-4162 front panel connector pins, channels, and LEDs.

    Item
    A LED Access Status indicator
    B LED Voltage Status Indicator
    Table 1. LED Access Status Indicator
    Status Indicator Device State
    (Off) Not Powered
    Green Powered
    Amber Device is being accessed
    Table 2. LED Voltage Status Indicator
    Status Indicator Output Channel State
    (Off) All device outputs are disconnected from their voltage generation sources through output disconnect relays.
    Green At least one device output is connected to a voltage generation source.
    Red The device has a fault or is in error due to the voltage generated or measured by the device. Refer to the driver software for possible sources. The device will not operate until the error is cleared and/or the device is reset.

    Pinout

    The following figure and table provide detailed signal information for the PXIe-4162 connector.

    Table 3. PXIe-4162 Signal Descriptions
    Bundle Channel Pin Signal Description
    A 0 62 Output HI
    61 Sense HI
    41 Sense LO
    42 Guard[1]
    1 20 Output HI
    19 Sense HI
    17 Sense LO
    18 Guard[1]
    2 39 Output HI
    38 Sense HI
    59 Sense LO
    60 Guard[1]
    B 3 57 Output HI
    56 Sense HI
    36 Sense LO
    37 Guard[1]
    4 15 Output HI
    14 Sense HI
    12 Sense LO
    13 Guard[1]
    5 34 Output HI
    33 Sense HI
    54 Sense LO
    55 Guard[1]
    C 6 51 Output HI
    50 Sense HI
    30 Sense LO
    31 Guard[1]
    7 9 Output HI
    8 Sense HI
    6 Sense LO
    7 Guard[1]
    8 28 Output HI
    27 Sense HI
    48 Sense LO
    49 Guard[1]
    D 9 46 Output HI
    45 Sense HI
    25 Sense LO
    26 Guard[1]
    10 4 Output HI
    3 Sense HI
    1 Sense LO
    2 Guard[1]
    11 23 Output HI
    22 Sense HI
    43 Sense LO
    44 Guard[1]
    A, B, C, D 0 to 11 10 Output LO
    21 Calibration HI
    24 Not used
    29
    35
    40
    5 Void
    11
    16
    32
    47
    52
    53
    58

    Cable Bundles

    The PXIe-4162 has 12 channels organized into four cable bundles (A, B, C, D) for use with associated cable accessories. The following figure and table provide detailed bundle information.

    Bundle Channels
    A 0 to 2
    B 3 to 5
    C 6 to 8
    D 9 to 11
    • 1 Guard terminals are not supported in the highest current ranges: 60 mA or 100 mA.

    Recently Viewed Topics