Table Of Contents
PXIe-4135 Pinout
Version:
Last Modified: September 27, 2017
Table 1. Signal Descriptions
| Item | Description |
|---|---|
| A | Access Status LED |
| B | Voltage Status LED |
| C | Chassis ground |
| D | Output LO |
| E | Sense LO |
| F | Triaxial connector pin Output HI |
| G | Triaxial connector inner shield, Guard |
| H | Triaxial connector pin, Sense HI |
| I | Triaxial connector outer shield, Chassis ground |
| J | Safety Interlock Input |
| K | Safety Interlock Pass Thru - Input |
| L | Safety Interlock Ground |
| M | Safety Interlock Pass Thru - Ground |
Table 2. LED Access Status Indicator
| Status Indicator | Device State |
|---|---|
| (Off) | Not Powered |
| Green | Powered |
| Amber | Device is being accessed |
Table 3. LED Voltage Status Indicator
| Status Indicator | Output Channel State |
|---|---|
| (Off) | The device output is disconnected from the voltage generation source through output disconnect relays. |
| Green | The device output is connected to the voltage generation source and <42.4 V DC is present. |
| Amber | The device output is connected to the voltage generation source and ≥42.4 V DC is present. High voltage may be generated by the device itself or an external device. |
| Red | The device has a fault or is in error due to the voltage generated or measured by the device. Refer to the driver software for possible sources. The device will not operate until the error is cleared and/or the device is reset. High voltage may be present on the device. |