Table Of Contents

PXI-6529 Pinout

Version:
    Last Modified: March 21, 2017

    Table 1. Signal Descriptions
    Signal Direction Description

    P0.<0..7>+, P0.<0..7>–

    Input

    Isolated Input Port 0 Terminals—Take measurements at the positive terminal. A logic high (data bit of 1) indicates sufficient input voltage and current are present. The negative terminal serves as the reference from which the port line is measured.

    P1.<0..7>+, P1.<0..7>–

    Input

    Isolated Input Port 1 Terminals—Take measurements at the positive terminal. A logic high (data bit of 1) indicates sufficient input voltage and current are present. The negative terminal serves as the reference from which the port line is measured.

    P2.<0..7>+, P2.<0..7>–

    Input

    Isolated Input Port 2 Terminals—Take measurements at the positive terminal. A logic high (data bit of 1) indicates sufficient input voltage and current are present. The negative terminal serves as the reference from which the port line is measured.

    +5 V

    Output

    +5 V Power Source Provides +5 VDC power. These terminals are not isolated.

    GND

    Ground—These terminals are connected to the computer ground reference. These terminals are not isolated.

    P3.<0..7>+, P3.<0..7>–

    Output

    Isolated Input Port 3 Terminals—Take measurements at the positive terminal. A logic high (data bit of 1) indicates sufficient input voltage and current are present. The negative terminal serves as the reference from which the port line is measured.

    P4.<0..7>+, P4.<0..7>–

    Output

    Isolated Input Port 4 Terminals—Take measurements at the positive terminal. A logic high (data bit of 1) indicates sufficient input voltage and current are present. The negative terminal serves as the reference from which the port line is measured.

    P5.<0..7>+, P5.<0..7>–

    Output

    Isolated Input Port 5 Terminals—Take measurements at the positive terminal. A logic high (data bit of 1) indicates sufficient input voltage and current are present. The negative terminal serves as the reference from which the port line is measured.


    Recently Viewed Topics