Table Of Contents

XNET Read (G Dataflow)

Last Modified: November 2, 2017

Reads data from the network using an XNET session.

Frame

node_icon
Reads data from a session as an array of CAN frames. The session must use a CAN interface and a mode of Frame Input Stream, Frame Input Queued, or Frame Input Single-Point.
node_icon
Reads data from a session as an array of FlexRay frames. The session must use a FlexRay interface and a mode of Frame Input Stream, Frame Input Queued, or Frame Input Single-Point.
node_icon
Reads data from a session as an array of LIN frames. The session must use a LIN interface and a mode of Frame Input Stream, Frame Input Queued, or Frame Input Single-Point.
node_icon
Reads data from a session as an array of raw bytes.

Signal

node_icon
Reads data from a session of Signal Input Single-Point mode.
node_icon
Reads data from a session of Signal Input Waveform mode. The data represents a waveform of resampled values for each signal in the session. You can wire the data directly to a LabVIEW Waveform Graph for display.
node_icon
Reads data from a session of Signal Input XY mode.

State

node_icon
Reads the state of CAN communication using an XNET session.
node_icon
Reads the state of J1939 communication using an XNET session.
node_icon
Reads the state of LIN communication using an XNET session.
node_icon
Returns the current state for the session provided.

FlexRay

node_icon
Reads the state of FlexRay communication using an XNET session.
node_icon
Reads the current FlexRay global time using an XNET session.
node_icon
Reads statistics for FlexRay communication using an XNET session.

Time

node_icon
Reads the time at which the session's interface completed its integration with the network cluster. This represents the time at which communication began.
node_icon
Reads the current interface timestamp using an XNET session.
node_icon
Reads the time when the session interface started its integration.

Recently Viewed Topics