Table Of Contents

Wait on Event Multimode Function (G Dataflow)

Version:
    Last Modified: April 4, 2017

    Suspends execution of an application thread and waits for an event for a specified time period.

    node_icon
    Waits for the device clear message to be sent to the local controller.
    node_icon
    Waits until the GPIB controller has gained or lost CIC (controller-in-charge) status.
    node_icon
    Waits until the GPIB controller is addressed to talk.
    node_icon
    Waits until the GPIB controller has been addressed to listen.
    node_icon
    Waits for a PXI interrupt event.
    node_icon
    Waits for a serial break event to occur.
    node_icon
    Waits for the termination character for the serial device.
    node_icon
    Waits until the Clear to Send (CTS) line changes state.
    node_icon
    Waits until the Data Set Ready (DSR) line changes state.
    node_icon
    Waits until the Data Carrier Detect (DCD) line changes state.
    node_icon
    Waits until the Ring Indicator (RI) input signal is asserted.
    node_icon
    Waits until at least one data byte has been received.
    node_icon
    Waits for a trigger event.
    node_icon
    Waits until a USB interrupt has occurred.
    node_icon
    Waits for the specified event that is wired in.
    node_icon
    Waits until a VXIbus interrupt is received from the device.
    node_icon
    Waits until the application receives a VXIbus signal or VXIbus interrupt from the device.
    node_icon
    Waits until the VXI/VME SYSFAIL* line is asserted.
    node_icon
    Waits until the VXI/VME SYSRESET* line is asserted.

    Service Request

    node_icon
    Waits for a Service Request event without returning a status byte.
    node_icon
    Waits for a Service Request event from a device.

    Recently Viewed Topics