Table Of Contents

Send Remote Local Command (G Dataflow)

Version:
    Last Modified: March 3, 2017

    Puts a GPIB interface or instrument into remote, local, or lockout mode.

    connector_pane_image
    datatype_icon

    session in

    The resource to be used.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    mode

    The mode to place the instrument in.

    Name Value Description
    Local 6 Send the GTL (Go To Local) command. The instrument will go into either LOCS (LOCal State) or LWLS (Local With Lockout State).
    Local without Lockout 2 Send the GTL (Go To Local) command and de-assert the REN (Remote ENable) interface line, putting it in LOCS (LOCal State).
    Remote 3 Assert the REN (Remote ENable) interface line and address the device. The instrument will go into either REMS (REMote State) or RWLS (Remote With Lockout State).
    Remote with Local Lockout 5 Address the device and send it an LLO (Local LockOut) command, putting it in the RWLS (Remote With Lockout State).
    datatype_icon

    session out

    The resource to which a VISA session is opened.

    This output also includes the class for the session, which matches that of session in.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported


    Recently Viewed Topics