Table Of Contents

Why Don't NI-USRP Examples Appear in the NI Example Finder in LabVIEW?

Last Modified: July 10, 2019

NI-USRP does not install examples into the NI Example Finder. You can access NI-USRP examples from the following locations:

Content Type Description LabVIEW LabVIEW NXG 3.1 or LabVIEW Communications System Design Suite 3.1
Examples NI-USRP includes several example applications that serve as interactive tools, programming models, and building blocks in your own applications. NI-USRP includes examples for getting started and other software-defined radio (SDR) functionality.
spd-note-note
Note  

You can access additional examples from the Code Sharing Community at ni.com/usrp.

  • From the Start menu at Start»All Programs»National Instruments»NI-USRP»Examples.
  • From the LabVIEW Functions palette at Instrument I/O»Instrument Drivers»NI-USRP»Examples.
  • From the Learning tab, select Examples»Hardware Input and Output»NI-USRP.
  • From the Learning tab, select Examples»Hardware Input and Output»NI USRP RIO.
Lessons NI-USRP includes lessons that guide you through the process of identifying and demodulating an FM signal with your device. N/A From the Learning tab, select Lessons»Getting Started»Demodulating FM Signals with the NI... and choose a task to accomplish.
Sample Projects USRP RIO includes several sample projects that serve as starting points to build a USRP RIO streaming application. From the Create Project dialog, select Sample Projects in the left pane and navigate to the NI-USRP Simple Streaming project. From the Projects tab, select USRP RIO and choose the applicable sample project for your device and setup.

Recently Viewed Topics