Table Of Contents

Timing (G Dataflow)

Version:
Last Modified: October 23, 2017

Timing nodes for NI-Sync devices.

node_icon
Frees a resource that contains a generated clock.
node_icon
Frees the terminal of any future time events previously created.
node_icon
Generates a clock synchronized to the board time of the module.
node_icon
Schedules a future time event.
node_icon
Ends timestamping enabled by Enable Time Stamp Trigger.
node_icon
Creates a timestamp every time the signal of a specified trigger or clock changes. You can then read a single timestamp or multiple timestamps at a later point in the data flow.
node_icon
Displays the current board time of the specified device.
node_icon
Reads timestamps recorded on the internal software buffer for the specified terminal.
node_icon
Sets the absolute board time of the device to a certain time.
node_icon
Sets the external time reference of a time-based timing and synchronization module. NI-Sync uses this time reference to update the value and frequency of the module's board time.
node_icon
Waits until the board time of the device reaches a specified time before continuing the program.
node_icon
1588 functions for NI-Sync
node_icon
GPS and IRIG functions for NI-Sync.

Recently Viewed Topics