Table Of Contents

Calibration (G Dataflow)

Version:
Last Modified: October 23, 2017

Calibration functions for NI-Sync.

node_icon
Sets the Clk10 phase voltage value to be written to the specified device's non-volatile onboard memory using an external calibration reference.
node_icon
Sets the DDS start pulse phase voltage to be written to the specified device's non-volatile onboard memory using an external calibration reference.
node_icon
Sets the oscillator voltage value to be written to the specified device's non-volatile onboard memory using an external calibration reference.
node_icon
Sets the password required to begin a new external calibration session on the specified device.
node_icon
Ends an external calibration session that you began using Initialize External Calibration.
node_icon
Reads the Clk10 phase voltage value currently stored on the specified device's non-volatile onboard memory.
node_icon
Reads the phase voltage of the DDS start pulse currently stored on the specified device's non-volatile onboard memory.
node_icon
Reads the date and time, in Greenwich Mean Time (GMT), of the specified device's last external calibration session.
node_icon
Reads the temperature, in degrees Celsius, of the specified module's circuitry during its last external calibration session.
node_icon
Returns the number of months recommended between external calibration sessions for the device.
node_icon
Reads the voltage that controls the oscillator frequency currently stored on the specified device's non-volatile onboard memory.
node_icon
Begins an external calibration session for the specified device.

Recently Viewed Topics