Table Of Contents

Timing (G Dataflow)

Version:
    Last Modified: March 2, 2017

    Timing nodes for NI-Sync devices.

    node_icon
    Frees a resource that contains a generated clock.
    node_icon
    Frees the terminal of any future time events previously created.
    node_icon
    Generates a clock synchronized to the board time of the module.
    node_icon
    Schedules a future time event.
    node_icon
    Ends timestamping enabled by Enable Time Stamp Trigger.
    node_icon
    Creates a timestamp every time the signal of a specified trigger or clock changes. You can then read a single timestamp or multiple timestamps at a later point in the data flow.
    node_icon
    Displays the current board time of the specified device.
    node_icon
    Reads timestamps recorded on the internal software buffer for the specified terminal.
    node_icon
    Sets the absolute board time of the device to a certain time.
    node_icon
    Sets the external time reference of a time-based timing and synchronization module. NI-Sync uses this time reference to update the value and frequency of the module's board time.
    node_icon
    Waits until the board time of the device reaches a specified time before continuing the program.
    node_icon
    1588 functions for NI-Sync
    node_icon
    GPS and IRIG functions for NI-Sync.

    Recently Viewed Topics