Table Of Contents

External Calibration

Last Modified: April 2, 2018

External calibration functions for NI-SCOPE.

node_icon
For the PXI-5900 PXI RF Amplifier, this node calibrates the gain and offset.
node_icon
Externally calibrates the compensation attenuator.
node_icon
For NI 5105 digitizers, this function calibrates the external clock digital clock managers (DCMs).
node_icon
For the PCI-5911, this node externally calibrates the internal reference.
node_icon
For the PXIe-5622, this node calibrates the frequency response of the device.
node_icon
For the NI 5102, this node externally calibrates a specified channel and vertical range.
node_icon
Externally calibrates the vertical offset.
node_icon
Externally calibrates the vertical range for the specified channel and vertical range setting.
node_icon
Calibrates the sample rate of SMC-based digitizers.
node_icon
Changes the password used to begin an external calibration session.
node_icon
Closes an external calibration session.
node_icon
Returns the number of times the oscilloscope has been calibrated.
node_icon
Returns the value of the internal reference that is stored with Set Calibration Internal Reference during external calibration.
node_icon
Returns the miscellaneous information you can store during an external calibration session using Set Calibration User-Defined Info.
node_icon
Returns the date of the last self-calibration, external calibration, or manufacturer calibration.
node_icon
Returns the onboard temperature, in degrees Celsius, of an SMC-based oscilloscope at the time of the last self-calibration or external calibration.
node_icon
Opens an external calibration session and produces a calibration session handle that is required by the external calibration nodes.
node_icon
Takes an acquisition from a specified channel and retrieves the initial X value, which includes the time-to-digital conversion.
node_icon
For the PXI-5112 and PCI-5112, this node routes the internal reference to the front BNC connector of the specified channel.
node_icon
For the PXI-5900 PXI RF Amplifier, this node connects the specified channel to the calibration source and sets the calibration source to ±10 V or to GND.
node_icon
For the PXI-5112 and PCI-5112, this node allows you to store the measured internal reference voltage value.
node_icon
Allows you to store miscellaneous information in the EEPROM of a device.

Recently Viewed Topics