Table Of Contents

External Calibration

Last Modified: September 15, 2017

External calibration functions for NI-SCOPE.

node_icon
For the NI 5900 differential amplifier, this function calibrates the gain and offset.
node_icon
Externally calibrates the compensation attenuator.
node_icon
For NI 5105 digitizers, this function calibrates the external clock digital clock managers (DCMs).
node_icon
For the NI 5911, this function externally calibrates the internal reference.
node_icon
For the NI 5622, this function calibrates the frequency response of the device.
node_icon
For the NI 5102, this function externally calibrates a specified channel and vertical range.
node_icon
Externally calibrates the vertical offset.
node_icon
Externally calibrates the vertical range for the specified channel and vertical range setting.
node_icon
For SMC-based devices, this function calibrates the sample rate of the digitizer.
node_icon
Changes the password used to begin an external calibration session.
node_icon
Closes an external calibration session.
node_icon
Returns the number of times the digitizer has been calibrated.
node_icon
Returns the last self-calibration, external calibration, or manufacturer calibration date.
node_icon
Returns the value of the internal reference that is stored with Store Calibration Internal Reference during external calibration.
node_icon
Returns the miscellaneous information you can store during an external calibration session using Store Calibration Miscellaneous Info.
node_icon
Returns the onboard temperature, in degrees Celsius, of the digitizer at the time of the last self-calibration or external calibration.
node_icon
Takes an acquisition from a specified channel and retrieves the initial X value, which includes the time-to-digital conversion.
node_icon
For the NI 5112, this function routes the internal reference to the front BNC connector of the specified channel.
node_icon
For the NI 5900 differential amplifier, this function connects the specified channel to the calibration source and sets the calibration source to ±10 V or to GND.
node_icon
Opens an external calibration session handle that is required by all external calibration nodes..
node_icon
For the NI 5112, this function allows you to store the measured internal reference voltage value.
node_icon
Allows you to store miscellaneous information in the EEPROM of a device.

Recently Viewed Topics