Table Of Contents

Route Internal Reference Calibration (G Dataflow)

Version:
    Last Modified: March 3, 2017

    For the NI 5112, this function routes the internal reference to the front BNC connector of the specified channel.

    Use this function when measuring the internal reference of the NI 5112 and storing the value in the EEPROM with Store Calibration Internal Reference, which allows tracking of the verification procedure and tracking the drift of the source over time.

    connector_pane_image
    datatype_icon

    session in

    The instrument handle that you obtain from Start Calibration. The handle identifies a particular instrument session.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    which reference

    The reference to store, fetch, or route.

    datatype_icon

    options

    The options for routing a signal.

    Name Description
    Positive Routes a positive reference.
    Negative Routes a negative reference.
    Unroute Ref. Unroutes the reference.
    datatype_icon

    session out

    Passes the instrument handle to the next node in the program. This parameter has the same value as session in.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported


    Recently Viewed Topics