Table Of Contents

Is Device Ready (G Dataflow)

Version:
    Last Modified: March 3, 2017

    Returns whether or not the device is ready to be used.

    connector_pane_image
    datatype_icon

    resource name

    The device name assigned by Measurement & Automation Explorer (MAX).

    Resource Name Syntax Examples

    Example Device Type Syntax
    1 Traditional NI-DAQ device DAQ::1 (1 = device number)
    2 NI-DAQmx device myDAQmxDevice (myDAQmxDevice = device name)
    3 NI-DAQmx device DAQ::myDAQmxDevice (myDAQmxDevice = device name)
    4 NI-DAQmx device DAQ::2 (2 = device name)
    5 IVI logical name or IVI virtual name myLogicalName (myLogicalName = name)

    Syntax Example Notes

    1. For Traditional NI-DAQ devices, the syntax is DAQ::n, where n is the device number assigned by MAX.
    2. For NI-DAQmx devices, the syntax is just the device name specified in MAX. Typical default names for NI-DAQmx devices in MAX are Dev1 or PXI1Slot1. You can rename an NI-DAQmx device by right-clicking on the name in MAX and entering a new name.
    3. An alternative syntax for NI-DAQmx devices consists of DAQ::NI-DAQmx device name. This naming convention allows you to use an NI-DAQmx device in an application that was originally designed for a Traditional NI-DAQ device.
    4. If the application expects DAQ::1, you can rename the NI-DAQmx device to 1 in MAX and pass in DAQ::1 for the resource name, as shown in this example. If you use the DAQ::n syntax and an NI-DAQmx device name already exists with that same name, the NI-DAQmx device is matched first.
    5. You can also pass in the name of an IVI logical name or an IVI virtual name configured with the IVI Configuration utility. A logical name identifies a particular virtual instrument. A virtual name identifies a specific device and specifies the initial settings for the session.
      spd-note-caution
      Caution  

      Traditional NI-DAQ and NI-DAQmx device names are not case-sensitive. However, all IVI names, such as logical names, are case-sensitive. If you use logical names, driver session names, or virtual names in your program, you must make sure that the name you use matches the name in the IVI Configuration Store file exactly, without any variations in the case of the characters.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.
    datatype_icon

    device ready?

    A Boolean value that returns whether or not the device is ready to be used.

    True The device is ready to be used.
    False The device is not ready to be used.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported


    Recently Viewed Topics