Table Of Contents

Get Frequency Response (G Dataflow)

Version:
    Last Modified: March 3, 2017

    Gets the frequency response of the digitizer for the current configurations of the channel attributes.

    spd-note-note
    Note  

    This node can be used only with high-speed digitizers that support onboard signal processing (OSP).

    connector_pane_image
    datatype_icon

    session in

    Identifies a particular instrument session.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    channels

    The channel from which to acquire data.

    Channel String Syntax

    You can input channels with the following options:
    • A single channel, such as 0
    • A list of channels, such as 0,1 or 3,2,1,0.
    • A range of channels, such as 0-7 or 0:7.
    spd-note-note
    Note  

    The order of channels in a list is important. The data for each channel is returned in the order the channels occur in the list.

    datatype_icon

    number of frequencies

    The number of frequencies in the returned spectrum.

    datatype_icon

    session out

    Passes the instrument handle to the next node in the program. This parameter has the same value as session in.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.
    datatype_icon

    frequencies

    An array of frequencies that corresponds with the amplitude and phase response of the device.

    datatype_icon

    magnitudes

    The array of magnitudes that correspond with the magnitude response of the device.

    datatype_icon

    phases

    The array of phases that correspond with the phase response of the device.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported


    Recently Viewed Topics