Table Of Contents

Fast mmWave Port Switching

Last Modified: September 21, 2018

You can configure the mmRH-3602/3603 to route mmWave signals to and/or from one of the following two mmRH-3602/3603 radio head antenna ports: TX1/RX1 and RX2.

Use the NI mmWave Reference Project and the Configure mmWave Port VI for general configuration of the mmRH-3602/3603 radio head. If you require <2 μs port reconfiguration, you can configure the mmRH-3602/3603 radio head to monitor a PXI trigger line and switch between the two port states on a trigger state change.

To learn more about using the fast mmWave port switching feature, open the NI mmWave Reference Project at <NIDIR>/LabVIEW <Year>/examples/instr/niMmWave/niMmWave Reference Project.lvproj and select Fast mmWave Port from the Project Explorer window.

Recently Viewed Topics