Table Of Contents

Close External Calibration (G Dataflow)

Last Modified: March 1, 2019

Closes an NI-HSDIO external calibration session and, if specified, stores the new calibration constants and calibration data in the onboard EEPROM.

spd-note-note
Note  

Whether you commit or cancel, the device is reset and the FPGA is reloaded afterwards.

connector_pane_image
datatype_icon

session in

Instrument handle that identifies your calibration session.

This parameter is obtained from the niHSDIO Initialize External Calibration node

datatype_icon

calibration action

The action to perform at closing.

Name Value Description
Commit 62 The new calibration constants and data determined during the external calibration session are stored in the onboard EEPROM, given that the calibration was complete and passed successfully.
Cancel 63 No changes are made to the calibration constants and data in the EEPROM.

Default: Commit

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics