Table Of Contents

Action

Last Modified: March 1, 2019

Use Action nodes to program dynamic and static acquisition operations.

node_icon
Commits any pending attributes to hardware and starts the dynamic operation.
node_icon
Pauses execution of your program until the dynamic data operation is completed or the node returns a timeout error.
node_icon
Stops a running dynamic session.
node_icon
Transfers waveform data from PC memory to onboard memory.
node_icon
Initiates a waveform acquisition on channels enabled for dynamic acquisition, waits to acquire the number of samples specified in samples to read, and returns the acquired data.
node_icon
Immediately reads all PFI channels configured for static acquisition. The least significant bit of read data corresponds to the lowest physical PFI channel number.
node_icon
Transfers acquired waveform data from device memory to PC memory. This data was previously written to onboard memory by the hardware after the hardware was initiated.
node_icon
Returns the sample error information from a hardware comparison operation.
node_icon
Use the Software-Timed PMU nodes to measure and source voltages and currents in your system.
node_icon
Use the Static nodes to program static acquisition operations.

Recently Viewed Topics