From 12:00 PM - 8:00 PM CST on Thursday, October 18, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Table Of Contents

Get Last External Calibration Date And Time (G Dataflow)

Version:
    Last Modified: September 27, 2017

    Returns the date and time of the most recent successful external calibration.

    The time returned is 24-hour (military) local time; for example, if the device was calibrated at 2:30 PM, this node returns 14 for the hours parameter and 30 for the minutes parameter.

    connector_pane_image
    datatype_icon

    session in

    Instrument handle that identifies your calibration session.

    This parameter is obtained from the niHSDIO Initialize External Calibration node

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    year

    The year in which the device was last calibrated.

    datatype_icon

    month

    The month in which the device was last calibrated.

    datatype_icon

    day

    The day on which the device was last calibrated.

    datatype_icon

    hour

    The hour (in 24-hour time) in which the device was last calibrated.

    datatype_icon

    minute

    The minute in which the device was last calibrated.

    datatype_icon

    session out

    Session handle that passes a reference to your calibration session to the next node.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics