Table Of Contents

Convert Binary To WDT (Convert Binary To WDT Stimulus And Response Data (U32)) (G Dataflow)

Version:
    Last Modified: September 27, 2017

    Compiles binary data to bidirectional drive (0, 1, Z) and compare (H, L, X) data.

    spd-note-note
    Note  

    A bit cannot be set to 1 in both the drive enable and compare enable arrays. Comparing values (H, L, and X) always causes the channel to be set to tristate.

    connector_pane_image
    datatype_icon

    data

    The specified high and low values for driving or comparing data in digital waveform.

    datatype_icon

    dt

    The specified time between values in digital waveform.

    datatype_icon

    signal list

    The specified bits from data that you want to include in the digital waveform.

    datatype_icon

    drive enable

    The bitmask that selects between tristating and driving the value selected in the data.

    Bits set to 0 translate to Z (tristate), and bits set to 1 translate to the value of the corresponding bit in data.

    datatype_icon

    compare enable

    The bitmask that selects between X (ignore) and a compare value determined by the data array.

    Bits set to 0 translate to X, and bits set to 1 translate to L (compare low) or H (compare high) depending on the value of the corresponding bit in the data array. If this array is empty, all the values in the data array translate to L and H.

    datatype_icon

    compress data

    Parameter that specifies whether the digital waveform data is compressed.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    digital waveform

    The returned converted data for the waveform.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics