Table Of Contents

Configure Trigger (Configure Pattern Match Ref Trigger (U32)) (G Dataflow)

Version:
Last Modified: September 27, 2017

Configures the Reference trigger for pattern match triggering.

If the Reference trigger asserts before the required number of pretrigger samples are acquired, it is ignored. This node is valid only for acquisition sessions.

connector_pane_image
datatype_icon

channel list

The channels that are configured for pattern matching using the pattern array value.

datatype_icon

session in

Instrument session obtained from the Initialize Acquisition Session node, the Initialize Generation Session node, or the Initialize External Calibration node.

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

pattern

The binary pattern that activates the pattern match trigger under the conditions specified in trigger when.

Bits on channels not specified in channel list are ignored.

Default: 0

datatype_icon

trigger when

The conditions under which the trigger is sent.

Pattern matches The trigger is asserted when the sampled pattern matches the pattern specified in pattern.
Pattern does not match The trigger is asserted when the sampled pattern does not match the pattern specified in pattern.

Default: Pattern matches

datatype_icon

pretrigger samples

The number of pretrigger samples the device must receive before the Reference trigger is acknowledged.

Default: 500

datatype_icon

session out

Handle that identifies the session in all subsequent node calls.

The session out parameter is obtained from the Initialize Acquisition Session node or the Initialize Generation Session node.

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics