Table Of Contents

Configure Idle State (Configure Idle State String) (G Dataflow)

Version:
    Last Modified: September 27, 2017

    Sets the state of the channels when the dynamic generation operation is idle using a string format

    The operation may be idle when the generation operation completes normally, when the generation operation pauses from an active Pause trigger, or when the generation operation terminates because of an underflow error.

    connector_pane_image
    datatype_icon

    session in

    Instrument session obtained from the Initialize Acquisition Session node, the Initialize Generation Session node, or the Initialize External Calibration node.

    datatype_icon

    idle state

    The idle state of a dynamic generation operation.

    This expression is composed of characters:

    • X or x—Retains the previous value.
    • 1—Sets the channel to logic high.
    • 0—Sets the channel to logic low.
    • Z or z—Disables the channel (sets it to a high-impedance state).

    The first character in idle state corresponds to the first channel in channel list. The number of characters in pattern must equal the number of channels specified in channel list, or the node returns an error. For example, if you are trying to make three channels tristate, the idle state control needs to be "ZZZ" without any commas or spaces.

    datatype_icon

    channel list

    The channels being configured.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    session out

    Handle that identifies the session in all subsequent node calls.

    The session out parameter is obtained from the Initialize Acquisition Session node or the Initialize Generation Session node.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics