Table Of Contents

Configure Data Interpretation (G Dataflow)

Version:
Last Modified: September 27, 2017

Selects between acquiring high/low data or valid/invalid data during a static or dynamic acquisition operation.

spd-note-note
Note  

PXI/PXIe-654x/656x devices support only the high/low mode of data interpretation. NI-HSDIO returns an error if you select valid/invalid mode for an acquisition with these devices.

Select High or Low to get logic high or logic low values. Select Valid or Invalid to determine if the signal is within the specified voltage range (above Data Voltage Low Level but below Data Voltage High Level) or outside the range (below Data Voltage Low Level or above Data Voltage High Level).

connector_pane_image
datatype_icon

session in

Instrument session obtained from the Initialize Acquisition Session node, the Initialize Generation Session node, or the Initialize External Calibration node.

datatype_icon

channel list

The channels you want to apply settings to. Leave channel list blank to apply to all channels.

datatype_icon

data interpretation

The specified value for data interpretation.

Name Value Description
High or Low The data read represents logical values (logic high or logic low).
Valid or Invalid The data read represents whether channel data is within a specified voltage range.
datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

session out

Handle that identifies the session in all subsequent node calls.

The session out parameter is obtained from the Initialize Acquisition Session node or the Initialize Generation Session node.

datatype_icon

error out

Error information.

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported

Web Server: Not supported in VIs that run in a web application


Recently Viewed Topics