Table Of Contents

Configure Calibration State (Configure Calibration Device State) (G Dataflow)

Version:
    Last Modified: September 27, 2017

    Configures the internal routing of the device so that you can perform specific calibration steps.

    connector_pane_image
    datatype_icon

    session in

    Instrument session obtained from the Initialize Acquisition Session node, the Initialize Generation Session node, or the Initialize External Calibration node.

    datatype_icon

    calibration reference

    Parameter that specifies which internal routing path to configure based on the calibration type.

    Refer to the calibration procedure document for your device for the correct value to use.

    datatype_icon

    calibration type

    The section of the external calibration procedure you are trying to execute.

    Refer to the calibration procedure document for your device for the correct value to use.

    datatype_icon

    connector

    Parameter that selects whether to access the PMU pins on the AUX I/O connector or the REMOTE SENSE connector.

    Name Description
    AUX I/O

    Accesses the PMU pins on the AUX I/O connector. This is the default value.

    Remote Sense

    Accesses the PMU pins on the REMOTE SENSE connector.

    Using this parameter with the PXIe-6555/6556

    This parameter is valid only on the PXIe-6556, which has both the AUX I/O and REMOTE SENSE connectors. If you are operating an PXIe-6555, you must select Remote Sense because the PXIe-6555 does not have an AUX I/O connector. If you select AUX I/O while using an PXIe-6555, NI-HSDIO returns an error.

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    session out

    Session handle that passes a reference to your calibration session to the next node.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics