Table Of Contents

Close External Calibration (G Dataflow)

Version:
    Last Modified: September 27, 2017

    Closes an NI-HSDIO external calibration session and, if specified, stores the new calibration constants and calibration data in the onboard EEPROM.

    spd-note-note
    Note  

    Whether you commit or cancel, the device is reset and the FPGA is reloaded afterwards.

    connector_pane_image
    datatype_icon

    session in

    Instrument handle that identifies your calibration session.

    This parameter is obtained from the niHSDIO Initialize External Calibration node

    datatype_icon

    calibration action

    The action to perform at closing.

    Name Value Description
    Commit 62 The new calibration constants and data determined during the external calibration session are stored in the onboard EEPROM, given that the calibration was complete and passed successfully.
    Cancel 63 No changes are made to the calibration constants and data in the EEPROM.

    Default: Commit

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics