From 12:00 PM - 8:00 PM CST on Thursday, October 18, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Table Of Contents

Action

Version:
    Last Modified: September 27, 2017

    Use Action nodes to program dynamic and static acquisition operations.

    node_icon
    Commits any pending attributes to hardware and starts the dynamic operation.
    node_icon
    Pauses execution of your program until the dynamic data operation is completed or the node returns a timeout error.
    node_icon
    Stops a running dynamic session.
    node_icon
    Transfers waveform data from PC memory to onboard memory.
    node_icon
    Initiates a waveform acquisition on channels enabled for dynamic acquisition, waits to acquire the number of samples specified in samples to read, and returns the acquired data.
    node_icon
    Immediately reads all PFI channels configured for static acquisition. The least significant bit of read data corresponds to the lowest physical PFI channel number.
    node_icon
    Transfers acquired waveform data from device memory to PC memory. This data was previously written to onboard memory by the hardware after the hardware was initiated.
    node_icon
    Returns the sample error information from a hardware comparison operation.
    node_icon
    Use the Software-Timed PMU nodes to measure and source voltages and currents in your system.
    node_icon
    Use the Static nodes to program static acquisition operations.

    Recently Viewed Topics