Table Of Contents

Trigger Nodes

Last Modified: September 26, 2018

Use the NI-FGEN trigger nodes to configure waveform generator triggering and to route signals from the waveform generator to other instruments.

node_icon
Sets the trigger source. The waveform generator responds to a trigger according to the current trigger mode.
node_icon
Sets the trigger mode for your waveform generator.
node_icon
Routes signals (clocks, triggers, and events) to the output terminal you specify.
node_icon
Extracts a session that can be wired to NI-TClk nodes.
node_icon
Routes various signals to the backplane trigger lines or front panel terminals.

Recently Viewed Topics