From 6:00 PM CST Friday, Feb 15th - 2:00 AM CST Sunday, Feb 17th, ni.com will be undergoing system upgrades that may result in temporary service interruption.

We appreciate your patience as we improve our online experience.

Table Of Contents

Configure Trigger (G Dataflow)

Last Modified: September 26, 2018

Sets the trigger source. The waveform generator responds to a trigger according to the current trigger mode.

Script

node_icon
Configures a Script Trigger for edge triggering, setting the trigger source and edge to detect.
node_icon
Configures a Script Trigger for level triggering, setting the trigger source and active level.
node_icon
Disables the Script Trigger.
node_icon
Configures a Script Trigger for software triggering.

Start

node_icon
Configures the Start Trigger for edge triggering, setting the trigger source and edge to detect.
node_icon
Disables the Start Trigger.
node_icon
Configures the Start Trigger to detect peer-to-peer endpoint fullness.
node_icon
Configures the Start Trigger for software triggering.

Recently Viewed Topics