Table Of Contents

Filter Nodes

Version:
    Last Modified: September 16, 2017

    Use the NI-FGEN filter nodes to configure analog and digital filtering of your waveform generator.

    node_icon
    Enables or disables the analog filter for the waveform generator and sets the filter correction frequency.
    node_icon
    Sets the FIR filter coefficients used by the onboard signal processing block. The values are coerced to the closest settings achievable by the waveform generator.
    node_icon
    Enables or disables the digital filter for the waveform generator.
    node_icon
    Returns the FIR filter coefficients used by the onboard signal processing block.

    Recently Viewed Topics