Table Of Contents

External Calibration Utility Nodes

Version:
    Last Modified: September 16, 2017

    Use the NI-FGEN external calibration utility nodes to get information about previous calibrations, store information, or password protect the external calibration data on your board.

    node_icon
    Changes the password that is required to initialize an external calibration session.
    node_icon
    Retrieves user-defined information from the onboard EEPROM.
    node_icon
    Returns the date and time of the last successful external calibration.
    node_icon
    Returns the temperature at the last successful external calibration.
    node_icon
    Returns the recommended interval between external calibrations in months.
    node_icon
    Overwrites the current calibration constants with those from the last successful external calibration. Invalidates data from any self-calibrations performed since the last time an external calibration was performed.
    node_icon
    Stores user-defined information in the onboard EEPROM.

    Recently Viewed Topics