Table Of Contents

External Calibration

Version:
Last Modified: April 28, 2017

Use the NI-FGEN external calibration nodes to perform external calibration when following the calibration procedure for your waveform generator model.

node_icon
Use the NI-FGEN ADC control nodes only when following the calibration procedure of the waveform generator.
node_icon
Use the NI-FGEN analog output nodes only when following the calibration DC gain and offset portion of the waveform generator calibration procedure.
node_icon
Closes an external calibration session and, if specified, stores the new calibration constants and calibration data, such as time and temperature, in the onboard EEPROM.
node_icon
Use the NI-FGEN external calibration utility nodes to get information about previous calibrations, store information, or password protect the external calibration data on your board.
node_icon
Use the NI-FGEN flatness control nodes only when following the flatness calibration section of the waveform generator calibration procedure.
node_icon
Creates and initializes a special NI-FGEN external calibration session.
node_icon
Use the NI-FGEN VCXO control nodes only when following the oscillator frequency calibration portion of the waveform generator calibration procedure.

Recently Viewed Topics