Table Of Contents

Configure Output Impedance (G Dataflow)

Last Modified: August 3, 2017

Sets the output impedance for the channel that you specify.

connector_pane_image
datatype_icon

session in

Handle that identifies your instrument session previously allocated by Initialize With Options.

datatype_icon

error in

Error conditions that occur before this node runs.

The node responds to this input according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Default: No error

datatype_icon

channel name

Name of the waveform generator channel that the node uses.

datatype_icon

impedance

Impedance value that you want the waveform generator to use in Ohms. The Output Impedance property sets to this value.

Name Value Description
50 ohms 0 The specified channel of the waveform generator is configured to 50 Ω output impedance.
75 ohms 1 The specified channel of the waveform generator is configured to 75 Ω output impedance.

Default: 50 ohms

datatype_icon

session out

Reference to your instrument session to wire to the next node.

datatype_icon

error out

The node produces this output according to standard error behavior.

Standard Error Behavior

Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

error in does not contain an error error in contains an error
If no error occurred before the node runs, the node begins execution normally.

If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

Where This Node Can Run:

Desktop OS: Windows

FPGA: Not supported


Recently Viewed Topics