Table Of Contents

Bode Analyzer Specifications

Version:
    Last Modified: May 14, 2018

    Oscilloscope

    Number of channels

    4

    Resolution

    14 bits

    Bandwidth

    50 MHz at -3 dB[1]

    Input impedance

    1 MΩ ‖ 15 pF

    Overvoltage protection

    ±50 V

    Accuracy

    2% of input + 1% of full scale

    Table 1. Input Range
    Range Full Scale Offset Offset Accuracy
    High gain (≤200 mV/div) 2 V peak-to-peak ±1 V ±25 mV
    Low gain (>200 mV/div) 50 V peak-to-peak ±25 V ±625 mV
    spd-note-note
    Note  

    Input voltages should not exceed 50 V DC or 30 V RMS.

    Function and Arbitrary Waveform Generator

    Number of channels

    2

    Maximum update rate (per channel)

    100 MS/s

    Resolution

    14 bits

    Slew rate

    188 V/µs

    Small signal bandwidth (-3 dB)

    15 MHz with no load

    Table 2. Output Range
    Gain Setting AC Amplitude Range DC Offset Range Resolution Amplitude Error DC Offset Error Total Output Range
    High gain ±10 V ±10 V 1.25 mV/LSB ±0.5% ±50 mV ±10 V
    Low gain ±2.5 V ±10 V 0.3 mV/LSB ±0.5% ±20 mV ±10 V

    Output impedance

    50 Ω

    DC current drive

    30 mA maximum

    Overvoltage protection

    Short-circuit to ground

    Power-on state

    High Impedance

    • 1 A probe with appropriate frequency response is required to reach the specified 50 MHz oscilloscope bandwidth.

    Recently Viewed Topics