Table Of Contents

Configure Offset Compensated Ohms (G Dataflow)

Version:
    Last Modified: September 16, 2017

    Configures the DMM to compensate for voltage offsets in resistance measurements.

    When Offset Compensated Ohms is enabled, the DMM measures the resistance twice: once with the current source on, and once with the current source turned off. Any voltage offset present in both measurements is cancelled out. This functionality is useful when measuring resistance values less than 10 kOhms.

    connector_pane_image
    datatype_icon

    session in

    Instrument identifier from previous NI-DMM nodes.

    Default: None

    datatype_icon

    offset compensated ohms

    Setting for Offset Compensated Ohms.

    NI-DMM sets the Offset Compensated Ohms property to this value. The following table describes the valid values for this parameter.

    Value Setting Description
    0 OFF Disables Offset Compensated Ohms.
    1 ON Enables Offset Compensated Ohms.

    Default: 0 (OFF)

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    session out

    Instrument identifier for subsequent NI-DMM nodes.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics