Table Of Contents

Configure Frequency Voltage Range (G Dataflow)

Version:
    Last Modified: September 16, 2017

    Specifies the expected maximum amplitude of the input signal for frequency and period measurements.

    The minimum peak-to-peak signal amplitude that a DMM can detect is 10% of the specified range.

    connector_pane_image
    datatype_icon

    session in

    Instrument identifier from previous NI-DMM nodes.

    Default: None

    datatype_icon

    frequency voltage range

    Expected maximum amplitude of the input signal.

    NI-DMM sets the Frequency Voltage Range property to this value. For a list of valid values, refer to the help for your DMM.

    You can use this parameter to turn Auto Range on or off. The following table describes valid values for configuring Auto Range.

    Value Setting Description
    -1.0 Auto Range ON Configures the DMM to take an Auto Range measurement to calculate the voltage range before each frequency or period measurement.
    -2.0 Auto Range OFF Disables Auto Range. NI-DMM sets the voltage range to the last calculated voltage range.
    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    session out

    Instrument identifier for subsequent NI-DMM nodes.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application

    Hardware Support:

    The following DMMs support this node:

    • PXI-4070
    • PXI-4071
    • PXI-4072
    • PXIe-4080
    • PXIe-4081
    • PXIe-4082


    Recently Viewed Topics