Table Of Contents
Configuration
Version:
Last Modified: April 2, 2018
Configure and control a DMM.
Configures frequency properties used for AC measurements.
Configures a DMM to compensate for gain drift since the last self-calibration or external calibration.
Configures the DMM to compensate for offset voltages on the input circuitry.
Configures the current source for diode measurements.
Specifies the expected maximum amplitude of the input signal for frequency and period measurements.
Configure common properties for DMM measurements.
Configures the properties for multipoint measurements.
Configures the DMM to compensate for voltage offsets in resistance measurements.
Specifies the powerline frequency.
Configures the DMM for waveform acquisitions.
Configures instrument coupling for voltage waveforms.
Exports the attribute configuration of a session to either a file or a buffer.
Imports an attribute configuration to the session from either a file or a buffer.
Configure a DMM for temperature measurements.
Control capacitance and inductance capabilities for supported DMMs.
Customize triggering functionality for your application.
Get data about your current DMM configuration.