Table Of Contents

Read (Multipoint) (G Dataflow)

Version:
    Last Modified: September 16, 2017

    Acquires multiple measurements and returns an array of measured values.

    The number of measurements the DMM makes is determined by theConfigure Multi Point node.

    connector_pane_image
    datatype_icon

    session in

    Instrument identifier from previous NI-DMM nodes.

    Default: None

    datatype_icon

    error in

    Error conditions that occur before this node runs.

    The node responds to this input according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.

    Default: No error

    datatype_icon

    maximum time

    32-bit integer specifying the maximum time allowed for this node to complete.

    If the node does not complete within this time interval, the node returns the NIDMM_ERROR_MAX_TIME_EXCEEDED error code. This may happen if an external trigger has not been received, or if the specified timeout is not long enough for the acquisition to complete. The DMM calculates the timeout automatically.

    Maximum Value

    The maximum valid value for this parameter is 86400000.

    Default: TIME LIMIT AUTO (-1)

    datatype_icon

    number to read

    Number of measurements to acquire.

    Maximum Number of Measurements

    The maximum number of measurements for a finite acquisition is (Trigger Count x Sample Count). These values are parameters in Configure Multi Point. For continuous acquisitions, up to 100,000 points can be returned at once. The valid range is any positive 32-bit integer.

    Default: 1

    datatype_icon

    session out

    Instrument identifier for subsequent NI-DMM nodes.

    datatype_icon

    error out

    Error information.

    The node produces this output according to standard error behavior.

    Standard Error Behavior

    Many nodes provide an error in input and an error out output so that the node can respond to and communicate errors that occur while code is running. The value of error in specifies whether an error occurred before the node runs. Most nodes respond to values of error in in a standard, predictable way.

    error in does not contain an error error in contains an error
    If no error occurred before the node runs, the node begins execution normally.

    If no error occurs while the node runs, it returns no error. If an error does occur while the node runs, it returns that error information as error out.

    If an error occurred before the node runs, the node does not execute. Instead, it returns the error in value as error out.
    datatype_icon

    measurements

    Array of measurement values.

    The size of this array must be at least as large as the number to read.

    datatype_icon

    actual number

    Number of measured values actually retrieved from the DMM.

    Where This Node Can Run:

    Desktop OS: Windows

    FPGA: Not supported

    Web Server: Not supported in VIs that run in a web application


    Recently Viewed Topics